Polaris Spabot™ – Cordless Automatic Spa Cleaner
The World’s First Robotic Spa Cleaner for Effortless Hot Tub Cleaning
The Polaris Spabot™ Cordless Automatic Spa Cleaner revolutionizes how you clean your spa or hot tub. Compact, intelligent, and fully cordless, this first-of-its-kind robotic cleaner takes care of the toughest spa cleaning tasks — scrubbing, vacuuming, and collecting debris — all while you sit back and relax.
Powered by a rechargeable lithium-ion battery and advanced water sensors, the Spabot navigates your spa’s contours, jets, and seats to leave every inch spotless. Whether you’re maintaining a high-end backyard spa or a commercial hot tub, the Polaris Spabot delivers professional-grade cleaning performance in a small, easy-to-use design.
Why Choose the Polaris Spabot™
For decades, Polaris has been the leading name in robotic pool cleaning. With the Spabot™, they’ve brought that same cutting-edge technology to spas and hot tubs — areas where traditional cleaners can’t reach or operate effectively.
This compact robot is designed to tackle the unique challenges of spa maintenance: tight spaces, uneven seating, and sensitive surfaces. Its smart navigation and self-contained debris filtration make spa care simple, efficient, and hands-free.
Key Benefits
-
Fully Cordless Operation: No cords, hoses, or external pumps required.
-
Rechargeable Power: High-capacity lithium-ion battery delivers up to 60 minutes of cleaning.
-
Smart Navigation: Intelligent sensors map the spa for thorough, even coverage.
-
Powerful Suction: Effectively removes sand, leaves, dirt, and fine debris.
-
Gentle on Surfaces: Safe for acrylic, fiberglass, and tile spa finishes.
-
Quick Charging: Fully recharges in just a few hours.
-
Easy to Clean: One-touch debris canister release and rinse design.
With the Spabot™, you can finally say goodbye to manual vacuuming and enjoy a spa that stays crystal clean — automatically.
Designed Specifically for Spas and Hot Tubs
Unlike traditional pool vacuums or suction devices, the Polaris Spabot is engineered exclusively for spa environments. Its compact footprint allows it to maneuver around seats, jets, and footwells, cleaning both flat and contoured surfaces.
The twin scrub brushes loosen debris and grime, while the high-suction intake captures everything from sand and grit to small leaves and hair. The Spabot automatically senses when it’s submerged and starts cleaning, then shuts off when lifted from the water — no switches or complicated controls needed.
Intelligent Cleaning Technology
The Smart Navigation System uses advanced sensors to detect walls, seats, and obstacles, ensuring the robot efficiently covers your entire spa without missing hidden spots. It’s programmed to adapt to the unique contours of most hot tubs and spa models, making it compatible with nearly all designs and sizes.
Every cycle provides complete coverage of:
-
Spa floors and seating surfaces
-
Footwells and tight corners
-
Around jets and contours
No cords. No hoses. Just pure, intelligent cleaning performance.
Cordless Convenience and Safety
Traditional spa vacuums can be cumbersome — requiring hoses, cords, or hand-pumping. The Polaris Spabot eliminates all of that. Its cordless, waterproof design makes operation completely safe and simple.
The rechargeable lithium-ion battery provides up to 60 minutes of continuous cleaning, which is more than enough for even large spas and smaller plunge pools. When it’s done, the robot automatically stops and can be easily lifted out using the integrated handle.
Place it on its compact charging dock, and it’s ready for the next cleaning session in a few hours.
Easy Maintenance with One-Touch Debris Removal
Keeping your cleaner clean has never been easier. The Polaris Spabot features a transparent top and one-touch debris canister that allows you to see when it’s full. Just press, lift, and rinse — no messy bags or filters to deal with.
The fine-mesh basket traps sand, dirt, and other small particles, helping maintain water clarity and reducing the strain on your spa’s filtration system.
Built to Last in Spa Conditions
Every component of the Polaris Spabot™ is built for longevity. From its corrosion-resistant hardware to its water-sealed battery housing, it’s engineered to perform in warm, chemical-treated spa water.
The soft-tread wheels and dual scrub brushes protect your spa’s finish while providing enough traction to climb slight inclines or contour transitions. With proper care, this robot will deliver years of worry-free spa cleaning with minimal maintenance.
Quick Setup and Operation
-
Charge the Spabot: Connect it to the included magnetic charger until fully charged.
-
Submerge and Release: Drop it into the spa; the built-in water sensor activates cleaning automatically.
-
Let It Clean: Allow it to run for about 45–60 minutes, depending on debris levels.
-
Retrieve and Rinse: Lift it out using the handle, open the debris canister, and rinse.
No programming, Wi-Fi, or setup required — the Spabot is plug, drop, and go simplicity.
Technical Specifications
| Feature | Details |
|---|---|
| Brand | Polaris |
| Model | Spabot™ |
| Power Source | Rechargeable lithium-ion battery |
| Runtime | Up to 60 minutes |
| Charging Time | Approx. 3 hours |
| Cleaning Coverage | Spa floor, seats, and corners |
| Navigation | Intelligent sensor-based mapping |
| Debris Collection | Fine-mesh removable canister |
| Surface Compatibility | Acrylic, fiberglass, tile |
| Weight | Lightweight, easy to lift |
| Warranty | 1 Year Limited Manufacturer Warranty |
Cleaner Water, Less Work
The Polaris Spabot™ doesn’t just clean — it helps improve your spa’s overall water quality. By removing dirt and debris before they enter the filter system, it reduces chemical usage and extends the life of your filter cartridges.
Regular use ensures your water remains clearer and your spa experience more enjoyable — without the constant hassle of hand-vacuuming or draining between cleanings.
Buy with Confidence from Benchmark Pool Supply
At Benchmark Pool Supply, we combine professional service expertise with top-quality pool and spa products. We don’t just sell the Polaris Spabot™ — we use and recommend it to our own service clients.
When you buy from us, you get:
-
Genuine Polaris products backed by manufacturer warranty.
-
Expert advice from technicians who maintain hundreds of spas and pools across Fresno and Clovis.
-
Fast local delivery or pickup from our Central Valley locations.
-
Dedicated after-sale support for setup, use, and maintenance.
Buy with confidence — Benchmark Pool Supply is your trusted source for premium pool and spa cleaning technology.
Frequently Asked Questions
How long does the Polaris Spabot™ run on a single charge?
The Spabot runs for up to 60 minutes per charge, depending on debris load and spa size — more than enough for a complete cleaning cycle.
Can I use it in both hot and cold water?
Yes. The Spabot is designed to function safely in typical spa temperatures, from cold plunge settings up to 104°F (40°C).
Does the Spabot need to be connected to power while operating?
No. It’s completely cordless and powered by its internal lithium battery. Just charge it between uses.
Is it safe for all spa finishes?
Absolutely. The Spabot’s soft wheels and gentle brushes are safe for acrylic, fiberglass, tile, and composite surfaces.
How do I clean the debris basket?
Simply lift the Spabot out of the spa, open the top-release lid, and rinse the fine-mesh basket with clean water.
How long does charging take?
A full charge takes about 3 hours and provides up to 60 minutes of run time.
Can I leave it in the spa when not in use?
It’s recommended to remove the Spabot when not actively cleaning or charging to preserve battery life and prevent unnecessary chemical exposure.
IN-STORE ONLY! Call or stop by for info
