Aladdin GO-KIT88 Jandy FloPro FHPM Pump Repair Kit

Complete FloPro FHPM Seal & O-Ring Repair Kit

• Aladdin GO-KIT88 pump repair kit for documented Jandy FloPro FHPM / FHP-series pump applications.
• Includes the mechanical shaft seal plus the key O-rings Aladdin specifies for FloPro pump service.
• Includes PSR-3890 mechanical seal, O-224 tailpiece O-ring, two O-39 drain-plug O-rings, O-658 lid O-ring, O-465 backplate O-ring, and O-654 diffuser O-ring.
• Includes PTFE Magic Lube for O-ring service.
• Cross-references multiple Jandy service parts, including R0337600, R0446000, R0480200, R0480300, R0622000, and R0479400.
• Verify the exact pump model and parts diagram before ordering.

Quick Product Summary

The Aladdin GO-KIT88 is a complete seal and O-ring repair kit for documented Jandy FloPro FHPM pump applications. Instead of ordering the common pump seals individually, GO-KIT88 packages the mechanical shaft seal, lid O-ring, backplate O-ring, diffuser O-ring, tailpiece O-ring, drain-plug O-rings, and PTFE Magic Lube needed for a typical FloPro reseal service. Aladdin specifically identifies GO-KIT88 for the Jandy FloPro FHPM and lists the compatible Jandy service references R0337600, R0446000, R0480200, R0480300, R0622000, and R0479400. Jandy's own FloPro parts documentation independently identifies these service areas on the pump, including the mechanical seal, lid O-ring, backplate O-ring, diffuser O-ring, drain-plug O-rings, and tailpiece O-rings. Confirm the exact pump model and revision before purchase rather than relying on appearance alone.

Best For

• Resealing a documented Jandy FloPro FHPM / FHP-series pump during repair or rebuild service
• Replacing multiple aged O-rings while the pump is already disassembled
• Mechanical-seal replacement combined with lid, backplate, diffuser, drain-plug, and tailpiece seal service
• Technicians and pool owners matching the documented GO-KIT88 / FloPro FHPM application

Why This Matters

• A pump can develop leaks or air intrusion from more than one sealing point.
• Replacing the common service seals together can reduce the chance of reopening the pump for another aged O-ring shortly after a repair.
• The mechanical shaft seal is the critical seal between the wet end and motor shaft area.
• Correct O-ring identification matters because Jandy FloPro pump revisions and related VS FloPro models can use overlapping but not always identical service parts.

Common Signs You Need This / Use This When

• Water is leaking between the pump wet end and motor area and the mechanical seal requires service.
• The lid O-ring is flattened, cracked, stretched, or no longer sealing correctly.
• The pump is being disassembled for a backplate, diffuser, or impeller-area repair.
• Drain-plug or tailpiece O-rings are aged or damaged during pump service.
• Your pump documentation or service reference identifies GO-KIT88 or the matching FloPro FHPM application.

Product Specifications

Compatibility / Fitment Notes

Aladdin identifies GO-KIT88 specifically as a FloPro FHPM pump repair kit and lists Jandy references R0337600, R0446000, R0480200, R0480300, R0622000, and R0479400. Jandy FloPro documentation identifies the corresponding tailpiece O-ring, drain-plug O-rings, lid O-ring, backplate O-ring, diffuser O-ring, and mechanical seal service points. Because newer VS FloPro configurations can share some individual parts while using different assemblies elsewhere, do not assume GO-KIT88 fits every VS FloPro pump. Match the pump model and parts diagram before ordering.

Installation / Use Notes

Disconnect electrical power before servicing the pump and follow the Jandy service instructions for disassembly and reassembly. Remove the old seals carefully, clean the O-ring grooves and mating surfaces, and inspect components for damage before installing the new seals. Install the mechanical seal without contaminating the polished sealing faces. Use the included lubricant only where appropriate for O-rings; do not apply lubricant to mechanical-seal faces unless the seal manufacturer's instructions specifically require it. Reassemble the pump, confirm all sealing surfaces are seated correctly, prime the pump as required, and inspect for leaks after startup.

Buy with Confidence

Benchmark Pool Supply helps customers identify pump repair parts by manufacturer, model, and service part number. GO-KIT88 is a documented Aladdin repair kit for the Jandy FloPro FHPM application, with the key pump seals packaged together for a more complete reseal service. Compare your pump model and Jandy parts diagram before ordering to confirm the kit is correct for your specific FloPro.