American Granby SCH 40 2 1/2" PVC 90° Elbow SL x SL

Large-diameter pool plumbing demands fittings that can handle high flow, pressure, and long-term exposure without distortion or failure. The American Granby Schedule 40 2 1/2” PVC 90-Degree Elbow (Slip x Slip) is a professional-grade fitting designed to create a clean, precise 90-degree turn in high-flow pool and spa plumbing systems.

This elbow is commonly used in main circulation lines, high-output pump systems, and commercial-style equipment pads where 2 1/2” plumbing is specified to reduce head pressure and improve overall system efficiency. Manufactured specifically for pool and spa environments, it is built to handle continuous water flow, chemical exposure, and the operating pressures found in modern residential and light commercial pool systems.

This is not a generic plumbing elbow—it is engineered for pool circulation systems where reliability and flow integrity are critical.

Why 2 1/2” PVC 90° Elbows Matter in Pool Plumbing

2 1/2” PVC pipe is typically used in higher-performance pool systems to increase flow capacity and reduce restriction. Directional changes in these systems must be strong, accurately sized, and pressure-rated to avoid stress, leaks, or premature equipment wear.

The American Granby 2 1/2” PVC 90-degree elbow is used to:

• Change direction on high-flow circulation lines

• Route plumbing around large equipment pads

• Connect high-capacity pumps, filters, and heaters

• Maintain alignment in underground plumbing runs

Using a properly manufactured Schedule 40 elbow ensures structural integrity while supporting efficient water movement.

Slip x Slip Connections for Permanent Installations

This fitting features Slip x Slip (socket x socket) connections, allowing 2 1/2” Schedule 40 PVC pipe to be solvent-welded directly into both ends of the elbow.

Slip connections provide:

• Strong, permanent joints

• Smooth internal flow paths

• Reliable, leak-resistant performance when installed correctly

Once cemented, the elbow becomes a fixed part of the plumbing system, suitable for both exposed and underground installations.

Schedule 40 PVC Built for Pool & Spa Systems

Manufactured from rigid Schedule 40 PVC, this elbow is pressure-rated for residential and light commercial pool systems. It is fully compatible with standard 2 1/2” Schedule 40 PVC pipe used throughout high-flow pool plumbing.

The material resists:

• Chlorinated and chemically treated water

• Temperature fluctuations

• Cracking and deformation under pressure

• Long-term outdoor and underground exposure

This ensures dependable performance throughout the life of the pool system.

Common Pool & Spa Applications

The American Granby SCH 40 2 1/2” PVC 90° Elbow is commonly used for:

• Main pool circulation plumbing

• High-output pump suction and discharge lines

• Filter and heater connections

• Commercial-style equipment pads

• Underground plumbing repairs

• New construction and major replumbing projects

Anywhere a strong, accurate 90-degree turn is required in 2 1/2” pool plumbing, this fitting is the correct solution.

Trusted by Pool Builders and Service Professionals

Pool builders and service technicians rely on precision fittings in large-diameter plumbing to avoid alignment issues, leaks, and callbacks. Inferior elbows can introduce stress points or weak joints in high-flow systems.

American Granby fittings are trusted because they offer:

• Precise dimensions for proper pipe fit

• Strong solvent-weld joints

• Proven durability in real-world pool environments

This elbow is a standard component in professional pool plumbing installations.

Specifications

Installation Notes

• Designed for use with 2 1/2” Schedule 40 PVC pipe

• Use approved PVC primer and cement for pool plumbing

• Dry-fit all components before cementing

• Allow full cure time before pressurizing the system

Proper installation ensures leak-free performance and long-term system reliability.

Buy with Confidence from Benchmark Pool Supply

When you purchase the American Granby SCH 40 2 1/2” PVC 90° Elbow SL x SL from Benchmark Pool Supply, you’re buying professional-grade pool plumbing components selected for real-world service conditions.

You receive:

• Genuine American Granby fittings

• Parts intended specifically for pool and spa systems

• Fast shipping from a knowledgeable pool supply team

• Support from professionals who understand pool plumbing

This is the same type of fitting used by pool builders and service technicians—not generic plumbing substitutes.