Clean & Clear / Quad DE Air Bleed SW-26-106 – OEM Replacement Part
Keep Your Filter Running at Peak Efficiency
Air trapped inside your filter can reduce circulation efficiency, increase pressure, and even cause damage over time. The Clean & Clear, Quad DE Air Bleed SW-26-106 is a real OEM replacement part. It helps restore proper air release in Pentair Clean & Clear and Quad DE filters.
This durable, factory-matched component ensures that air pockets escape easily, helping your system maintain optimal pressure and extend filter life. If you are replacing a worn-out bleed assembly or doing maintenance, this part helps your pool’s filtration system work well all season.
Why Air Bleeds Matter in Pool Filters
When water enters your filter, trapped air can accumulate in the tank. Without a functioning bleed, that air creates circulation issues and strain on your equipment.
A properly working air bleed:
-
Prevents Pressure Build-Up – Releases air to maintain safe operating pressure.
-
Improves Filtration – Ensures full water flow through the filter media.
-
Protects Equipment – Reduces stress on tanks, gauges, and plumbing.
-
Simplifies Maintenance – Makes it easier to prime and restart the pump.
If your filter is spitting air bubbles, showing high pressure, or losing prime, a worn or clogged air bleed could be the culprit.
Benefits of the SW-26-106 Air Bleed Replacement
-
OEM-Grade Fit – Specifically designed for Pentair Clean & Clear and Quad DE filters.
-
Durable Build – Resistant to chemical exposure and pressure fluctuations.
-
Restores Safety – Helps prevent dangerous pressure imbalances.
-
Improves Performance – Keeps water moving efficiently through your filter.
-
Easy Installation – Drop-in replacement with no modifications required.
-
Cost-Effective Maintenance – An affordable part that prevents expensive repairs.
Compatible Filters
This air bleed fits the following filter families:
-
Pentair Clean & Clear Cartridge Filters
-
Pentair Quad DE Filters
If you’re unsure about compatibility, check your filter’s model number or contact Benchmark Pool Supply for expert guidance.
When to Replace Your Air Bleed
Air bleeds can wear or clog over time due to:
-
Chemical exposure
-
Calcium buildup
-
Physical damage from cleaning or maintenance
Replace your air bleed if you notice:
-
Persistent air bubbles in return jets
-
Difficulty priming your pump
-
High pressure on the gauge despite clean filters
-
Leaks or cracks in the bleed assembly
Installation Steps
-
Turn Off Pump – Always power down before servicing.
-
Relieve Pressure – Open the manual relief valve to release pressure.
-
Remove Old Bleed – Unscrew or detach the existing part.
-
Install New SW-26-106 Air Bleed – Fit securely into place.
-
Restart System – Prime pump and check for proper operation.
⚠️ Safety Tip: Never attempt filter maintenance with the pump running or under pressure.
Long-Term Value
At just $19.95, this small but critical part helps avoid major repair costs by protecting your filter tank, pump, and plumbing. Keeping your air bleed in good working order ensures safer, more efficient pool operation.
Key Features
-
Part Number: SW-26-106
-
Compatible with Pentair Clean & Clear and Quad DE filters
-
Genuine OEM-style replacement for air bleed assemblies
-
Prevents pressure buildup by releasing trapped air
-
Easy to install with no modifications
-
Durable construction designed for pool environments
Why Buy from Benchmark Pool Supply?
At Benchmark Pool Supply, we know that even the smallest parts can make the biggest difference in keeping your pool safe and efficient. We carry a full line of Pentair OEM and replacement parts, so you can trust you’re getting the right component for your system.
When you shop with us, you’ll enjoy:
-
Reliable OEM-grade parts at competitive prices
-
Fast shipping so you can get your system back up quickly
-
Expert support from a team that understands pool equipment inside and out
We help pool owners and service pros keep water clear and systems protected.
FAQs About the Clean & Clear / Quad DE Air Bleed
Q: What does the air bleed do?
A: It allows trapped air to escape from your filter tank, preventing pressure build-up and circulation problems.
Q: How often should I replace this part?
A: Inspect yearly and replace when worn, cracked, or clogged. Many pool owners replace it every 2–3 years.
Q: Is this compatible with non-Pentair filters?
A: No. It is specifically designed for Pentair Clean & Clear and Quad DE filters.
Q: Can I install this myself?
A: Yes. Installation is simple, but always follow safety procedures when servicing pressurized equipment.
Q: What happens if I don’t replace a failing air bleed?
A: You may experience high pressure, poor circulation, or even damage to your filter tank.
