Aladdin O-136-0 7 in. Pump Lid O-Ring – Pentair 39300300
Key Benefits +
How to Use +
Specifications +
Buy with Confidence from Benchmark Pool Supply +
Buy with Confidence from Benchmark Pool Supply
- Trusted pool professionals
- 100% Genuine Manufacturer Parts Guaranteed
- Fast Shipping
Full Product Description +
Exact Legacy Pump Lid O-Ring for Pentair / American Products 39300300
- Aladdin O-136-0 replacement pump lid O-ring for verified legacy Pentair / American Products pump applications.
- Aladdin lists a published size/dimension of 7 inches.
- Verified pump families include Americana, Bronze-Noryl, SS H & L, and Ultra-Flow.
- Primary Pentair cross-reference is 39300300; additional Aladdin references include SSC O-2054 and SwimRite 60-828-487.
- Aladdin specifically identifies the SS H & L application as 1994 and earlier; verify the exact pump and lid configuration before ordering.
Quick Product Summary
The Aladdin O-136-0 is a replacement pump lid O-ring used on several legacy Pentair / American Products pump families. Aladdin’s current product listing identifies O-136-0 for Americana, Bronze-Noryl, SS H & L, and Ultra-Flow applications and cross-references Pentair 39300300. It is also associated with SSC O-2054 and SwimRite 60-828-487 applications.
This seal sits at the strainer-pot lid and helps the lid seal correctly when the pump is assembled. On suction-side pump components, an incorrect, damaged, flattened, or poorly seated lid O-ring can allow air into the system or permit water leakage when the pump is off. For that reason, the replacement should be matched by the exact pump family and lid configuration rather than by appearance alone.
O-136 is a legacy lid-seal application. Aladdin specifically describes the American Products SS H & L use as 1994 and earlier, and older Ultra-Flow parts references also tie 39300300 to the older lid configuration. Later lid designs can use a different seal, so exact parts-diagram verification is important before ordering.
Best For
Replacing the pump lid O-ring on a compatible Americana, Bronze-Noryl, SS H & L, Ultra-Flow, or other verified application whose parts documentation calls for Aladdin O-136-0 or Pentair 39300300.
Why Exact Legacy Lid-Seal Matching Matters
- Direct aftermarket cross-reference for Pentair / American Products 39300300.
- Verified by Aladdin for multiple legacy pump families.
- Helps avoid confusing older lid seals with later Ultra-Flow lid configurations.
- Useful during lid service, basket cleaning, pump teardown, or correction of lid-area air or water leakage.
Product Specifications
| Specification | Details |
|---|---|
| Brand | Aladdin Equipment Company |
| Aladdin Part Number | O-136-0 |
| UPC / Barcode | 601402121432 |
| Product Type | Pump lid O-ring |
| Published Size / Dimension | 7 in. |
| Verified Pump Families | Americana, Bronze-Noryl, SS H & L, Ultra-Flow |
| Primary Pentair Cross-Reference | 39300300 |
| Additional Cross-References | SSC O-2054; SwimRite 60-828-487 |
| Legacy Fitment Note | SS H & L application identified by Aladdin as 1994 and earlier |
| OEM Status | Aftermarket Aladdin replacement part |
Compatibility / Fitment Notes
Aladdin lists O-136-0 for Americana, Bronze-Noryl, SS H & L, and Ultra-Flow pump families. The primary Pentair / American Products reference is 39300300. Because these are older pump families and later lid configurations can use a different seal, confirm the exact pump model and replacement-parts diagram before ordering.
Installation / Use Notes
Turn electrical power to the pump off and relieve system pressure before opening the strainer lid. Remove the old O-ring, clean the lid groove and mating surface, and inspect the lid and sealing area for cracks, debris, or damage. Install the replacement evenly without twisting, pinching, or stretching it excessively.
Reassemble the lid according to the pump manufacturer’s instructions and check the lid area for air or water leakage after startup. Follow the equipment manufacturer’s guidance for any approved O-ring lubricant.
Buy with Confidence
Benchmark Pool Supply helps customers match legacy pump seals by exact pump family and manufacturer cross-reference. O-136-0 is tied directly to Pentair 39300300 and several older American Products pump families, so checking the lid style and parts diagram before ordering helps prevent confusion with later pump-lid seals.
Frequently Asked Questions
What is Aladdin O-136-0 used for?
O-136-0 is a pump lid O-ring used on verified Americana, Bronze-Noryl, SS H & L, and Ultra-Flow pump applications.
What Pentair part does O-136-0 replace?
Aladdin cross-references O-136-0 to Pentair / American Products 39300300.
What size is the O-136-0 O-ring?
Aladdin publishes the size/dimension as 7 inches. The manufacturer listing does not specify that the 7-inch measurement is an inside or outside diameter, so match by part number and pump application.
Is O-136-0 for older pump lids?
Yes. Aladdin specifically identifies the American Products SS H & L application as 1994 and earlier, and 39300300 is associated with legacy lid configurations.
Does O-136-0 fit every Pentair Ultra-Flow pump?
No. Ultra-Flow pump lid configurations changed over time. Verify the exact pump and lid parts diagram to confirm that the required lid O-ring is 39300300 / O-136-0.
