Polaris 48-222 OEM In-Line Filter Screen Replacement

Key Fit

• In-Line Filter Screen Replacement – Screens debris before water enters the cleaner to protect internal components

• Compatible Polaris Cleaners – Designed for Polaris 480, 380, and 280 pressure-side pool cleaners

• Prevents Clogging & Damage – Helps stop sand, grit, and debris from reaching gears, bearings, and jets

• Maintains Proper Water Flow – Supports consistent pressure and cleaner performance

• OEM Polaris Part – Genuine Polaris® 48-222 screen for correct fit and reliable operation

• Routine Maintenance Item – Should be inspected regularly and replaced when clogged, torn, or brittle

• Product Reference – Polaris In-Line Filter Screen | Part #48-222

Protect Your Polaris Cleaner with Proper In-Line Filtration

The Polaris In-Line Filter Screen (48-222) is a genuine OEM replacement part designed to protect Polaris pressure-side pool cleaners from debris damage. Installed inside the in-line filter housing, this fine mesh screen captures sand, grit, small stones, and debris before they reach the cleaner’s internal components.

Pressure-side cleaners rely on clean, unrestricted water flow to operate correctly. When debris enters the cleaner, it can cause internal wear, clogging, reduced performance, or premature failure. The Polaris 48-222 screen acts as a critical first line of defense, helping extend the life of your cleaner and maintain consistent operation.

What the Polaris 48-222 In-Line Filter Screen Does

The Polaris 48-222 filter screen is designed to strain debris out of the water supplied to the cleaner before it reaches moving parts such as gears, turbines, jets, and internal passages.

This screen helps:

• Prevent sand and grit from entering the cleaner

• Protect internal gears and drive components

• Maintain steady water pressure to the cleaner

• Reduce internal clogging and wear

• Extend overall cleaner lifespan

A missing, torn, or clogged screen can quickly lead to poor cleaner performance or costly internal repairs.

Designed for Polaris 480, 380 & 280 Pressure-Side Cleaners

This OEM screen is engineered specifically for Polaris pressure-side pool cleaners, including the popular:

• Polaris 480 PRO

• Polaris 380

• Polaris 280

The 48-222 screen fits directly into the Polaris in-line filter housing and matches original factory dimensions for proper seating and filtration. Despite Shopify’s category assignment, this is not a household water filtration cartridge—it is a pool cleaner protection component.

Why the In-Line Filter Screen Is So Important

Pressure-side cleaners operate downstream of the pool’s filtration system, often after booster pumps. Any debris that bypasses the main filter—especially fine sand—can be forced directly into the cleaner at high velocity.

Without a functioning in-line screen:

• Jets can clog

• Turbines can jam

• Gears can wear prematurely

• Cleaner performance becomes inconsistent

• Internal damage can occur quickly

Replacing the screen regularly is one of the simplest and most cost-effective ways to protect your Polaris cleaner.

Genuine Polaris OEM Construction

The Polaris 48-222 in-line filter screen is manufactured to OEM standards, ensuring:

• Proper mesh size for optimal debris capture

• Consistent water flow without restriction

• Durable materials resistant to chlorine and pool chemicals

• Correct fit inside Polaris filter housings

Aftermarket or generic screens often fail to seat correctly or restrict flow, leading to pressure loss or bypass.

When to Replace the Polaris In-Line Filter Screen

This screen should be inspected frequently and replaced when you notice:

• Tears or holes in the mesh

• Crushed or deformed screen shape

• Excessive buildup that cannot be cleaned

• Reduced cleaner movement or power

• Visible debris inside the cleaner

Pool service professionals often replace the screen during routine cleaner maintenance to prevent callbacks and failures.

Easy Maintenance & Installation

Replacing the Polaris 48-222 screen is quick and requires no special tools:

1. Turn off the booster pump

2. Open the Polaris in-line filter housing

3. Remove the old screen

4. Rinse or replace with a new 48-222 screen

5. Reassemble and restore water flow

Regular inspection and cleaning can extend the screen’s life, but replacement is recommended once the mesh degrades.

Cost-Effective Protection for High-Value Cleaners

Compared to the cost of internal cleaner repairs, replacing an in-line filter screen is inexpensive preventative maintenance. A small, low-cost part like the 48-222 screen can prevent damage to far more expensive components.

This makes it an essential part for:

• Homeowners protecting their investment

• Pool service technicians

• Commercial pool maintenance programs

Specifications & Product Details

Compatible Polaris Pool Cleaners

The Polaris 48-222 In-Line Filter Screen is designed for use with:

• Polaris 480 PRO pressure-side cleaner

• Polaris 380 pressure-side cleaner

• Polaris 280 pressure-side cleaner

Always verify compatibility using your Polaris parts diagram to ensure proper fit.

Buy with Confidence from Benchmark Pool Supply

Benchmark Pool Supply stocks genuine Polaris replacement parts trusted by pool owners and service professionals. The Polaris 48-222 In-Line Filter Screen is an essential maintenance item that helps protect your cleaner, reduce repairs, and keep your pool clean and clear.

When you buy from Benchmark Pool Supply, you get:

• Authentic OEM Polaris components

• Professional-grade pool equipment parts

• Knowledgeable product support

• Inventory selected for real-world pool conditions