Polaris 9-100-3008 UWF Connector Assembly for Vac-Sweep 360
Key Benefits +
How to Use +
Specifications +
Buy with Confidence from Benchmark Pool Supply +
Buy with Confidence from Benchmark Pool Supply
- Trusted pool professionals
- 100% Genuine Manufacturer Parts Guaranteed
- Fast Shipping
Full Product Description +
Restore the Polaris 360 Wall-to-Hose Connection
- Genuine Polaris Universal Wall Fitting (UWF) connector assembly for the Vac-Sweep 360 pressure-side pool cleaner.
- Connects the Polaris 360 feed hose to the pool wall return fitting.
- Designed for installation at a 1-1/2 inch pool return line.
- Supports a secure quick-disconnect connection for cleaner setup and removal.
- Exact Polaris part number 9-100-3008 with UPC 738919001381.
Quick Product Summary
The Polaris 9-100-3008 UWF Connector Assembly is the genuine wall-connection assembly used with the Polaris Vac-Sweep 360 pressure-side pool cleaner. It provides the connection point between the pool’s return line and the cleaner feed hose, allowing water flow from the circulation system to reach the cleaner through the 360 hose assembly.
Polaris’ installation instructions show the Universal Wall Fitting threaded into a 1-1/2 inch return line, with the quick disconnect installed into the UWF and the feed hose secured at the connector with a hose nut. This arrangement lets the quick disconnect be removed for cleaner service while leaving the wall fitting installed in the pool return.
Part number matters because Polaris uses different wall-fitting and hose configurations across pressure-side cleaner families. The 9-100-3008 assembly is specifically documented for the Polaris 360. Match the cleaner model and exact OEM part number before ordering rather than assuming another Polaris UWF assembly is interchangeable.
Best For
Replacing a worn, damaged, leaking, incomplete, or difficult-to-connect wall fitting assembly on a Polaris Vac-Sweep 360 cleaner when the pool-side return connection is the source of the problem.
Why This Matters
- A secure wall connection helps deliver the water flow the Polaris 360 needs for cleaner operation.
- Worn sealing or connector components can contribute to leaks, poor connection, or inconsistent cleaner performance.
- The quick-disconnect design allows the hose connection to be removed without repeatedly unthreading the wall fitting.
- Using the genuine 360-specific assembly reduces the risk of installing the wrong pressure-side wall connector.
Common Signs / Use This When
- The Polaris 360 feed hose will not connect securely at the pool wall.
- Water is leaking around the wall-fitting or quick-disconnect area.
- The existing UWF components are cracked, worn, missing, or damaged.
- The quick disconnect is difficult to attach or remove even after cleaning and inspection.
- Your Polaris 360 parts diagram calls for part 9-100-3008.
Product Specifications
| Specification | Details |
|---|---|
| Brand | Polaris |
| Manufacturer Part Number | 9-100-3008 |
| UPC / Barcode | 738919001381 |
| Product Type | Universal Wall Fitting connector assembly |
| Cleaner Compatibility | Polaris Vac-Sweep 360 |
| Cleaner Type | Pressure-side automatic pool cleaner |
| Pool Connection | 1-1/2 inch return line |
| Color | White |
| OEM Status | Genuine Polaris replacement part |
| Manufacturer Warranty | 90 days |
Compatibility / Fitment Notes
Polaris and current distributor documentation identify 9-100-3008 for the Vac-Sweep 360, including current white and Black Max 360 configurations. Do not assume this wall-fitting assembly is correct for Polaris 180, 280, 380, 3900, Quattro, or other pressure-side cleaner families unless their parts documentation specifically calls for 9-100-3008.
Installation / Use Notes
Turn off the pool circulation system before servicing the wall connection. Remove the old parts connecting the 360 hose to the pool wall. Polaris instructs installers to separate the universal wall fitting from the quick disconnect, thread the UWF into the 1-1/2 inch return line by hand, then install the quick disconnect into the secured UWF. Position the hose nut on the quick disconnect, push the hose onto the connector, and secure it with the hose nut.
Do not overtighten plastic fittings. After installation, restore circulation and inspect the connection for leakage and secure hose engagement. Follow the current Polaris installation instructions for the cleaner and wall fitting.
Buy with Confidence
Benchmark Pool Supply helps customers match Polaris cleaner parts by exact cleaner model, OEM part number, and component location. Wall fittings, hose nuts, swivels, feed hoses, and quick-disconnect parts can look similar across cleaner families, so matching 9-100-3008 specifically to the Polaris 360 helps avoid wrong-part orders.
Frequently Asked Questions
What does Polaris part 9-100-3008 do?
It is the Universal Wall Fitting connector assembly that connects the Polaris 360 feed hose to the pool’s return-line connection.
Does 9-100-3008 fit the Polaris Vac-Sweep 360?
Yes. Polaris documents 9-100-3008 as the UWF Connector Assembly for the Vac-Sweep 360.
What size pool return line is used with this assembly?
Polaris’ installation instructions specify a 1-1/2 inch return line for the Universal Wall Fitting.
Can the quick disconnect be removed without removing the wall fitting?
Yes. Polaris states that once the Universal Wall Fitting is secured, the quick disconnect can be removed without unthreading the UWF from the pool wall.
Is this the same wall fitting used on every Polaris pressure-side cleaner?
No. Polaris uses different hose and wall-connection parts across cleaner families. Verify that your cleaner specifically calls for part 9-100-3008 before ordering.
