Swimables SW-61-007 Large Drive Gear | Poolvergnuegen/AquaNaut
Key Benefits +
How to Use +
Specifications +
Buy with Confidence from Benchmark Pool Supply +
Buy with Confidence from Benchmark Pool Supply
- Trusted pool professionals
- 100% Genuine Manufacturer Parts Guaranteed
- Fast Shipping
Full Product Description +
Large Drive Gear Replacement + Poolvergnuegen-Style Drivetrain Service
- Swimables aftermarket large drive gear for compatible Hayward-style suction cleaner drivetrains
- Intended for Poolvergnuegen / AquaNaut-style large-drive-gear applications
- Corresponding Hayward large drive gear reference is PVXH007
- Helps restore gear engagement when the existing large drive gear is worn, chipped, or stripped
- Individual replacement component for targeted cleaner drivetrain repair
- Exact Swimables part number SW-61-007 simplifies replacement identification
The Swimables SW-61-007 Large Drive Gear is an aftermarket replacement drivetrain component for compatible Hayward-style suction-side pool cleaners. The large drive gear transfers rotation through the cleaner's internal gear train so the wheel-drive system can move the cleaner across the pool.
Hayward identifies PVXH007 as the large drive gear used in Poolvergnuegen and AquaNaut cleaner drivetrains. Because Swimables' current public replacement-parts directory does not presently show SW-61-007 or an official PVXH007 cross-reference, match SW-61-007 to the existing component and cleaner configuration before ordering rather than treating every PVXH007 application as automatically guaranteed.
Best For
- Replacing a visibly worn or damaged large drive gear
- Poolvergnuegen 2-wheel and 4-wheel style drivetrain service
- Compatible AquaNaut-style drivetrain repairs
- Cleaner movement problems traced specifically to large-gear wear
- Targeted rebuilds where the remaining cleaner body is still serviceable
Why This Gear Matters
The large drive gear is one part of a multi-component drivetrain. When its teeth become rounded, chipped, stripped, or otherwise damaged, the gear may no longer engage nearby drive components consistently. That can contribute to slipping, intermittent wheel movement, or a cleaner that stalls even when suction is adequate.
Similar symptoms can also be caused by shaft bearings, wheel hubs, steering components, turbine parts, smaller gears, obstructions, or incorrect suction, so confirm the failed component before replacing parts.
Common Signs to Inspect the Large Drive Gear
- Large gear teeth are visibly rounded, chipped, or stripped
- Cleaner wheels skip or intermittently stop
- Gear train slips or skips during manual inspection
- Cleaner stalls despite correct suction and clear hoses
- Internal inspection confirms wear at the large drive gear
Product Specifications
| Brand | Swimables |
|---|---|
| Product Type | Suction Cleaner Large Drive Gear |
| Manufacturer Part Number | SW-61-007 |
| Shopify Barcode | 810108820987 |
| Barcode Verification | Present in Benchmark Pool Supply Shopify record; independent public verification not found |
| Style | Hayward Poolvergnuegen / AquaNaut style |
| Application | Suction-side cleaner drivetrain |
| Corresponding Hayward Gear Reference | PVXH007 |
| Hayward-Documented PVXH007 Families | Poolvergnuegen 2-wheel / 4-wheel; AquaNaut 200 / 400 / 450 |
| Package Quantity | 1 large drive gear |
| OEM Status | Aftermarket Swimables replacement |
Compatibility & Fitment Notes
Hayward documents PVXH007 as the large drive gear for Poolvergnuegen 2-wheel and 4-wheel cleaners and AquaNaut 200, 400, and 450 applications. SW-61-007 is sold as a Swimables Hayward-style large drive gear, but Swimables' current public cross-reference directory does not list SW-61-007. Verify your cleaner model, existing gear, and part configuration before ordering.
Installation & Service Notes
Turn off the circulation system and remove the suction cleaner from operation before service. Open the cleaner according to the procedure for the exact model, confirm that the large drive gear is actually worn or damaged, and install the replacement in the corresponding drivetrain position. Inspect the small drive gears, turbine components, shaft bearings, wheel hubs, and steering parts while the cleaner is open.
Buy with Confidence
Benchmark Pool Supply helps customers identify suction-cleaner drivetrain parts by part number, cleaner model, and actual wear symptoms. Before ordering SW-61-007, compare the existing large drive gear and verify that your cleaner uses the compatible Poolvergnuegen/AquaNaut-style drivetrain configuration.
Frequently Asked Questions
What is Swimables SW-61-007?
SW-61-007 is an aftermarket large drive gear for compatible Hayward-style suction cleaner drivetrains.
What Hayward part is associated with this large drive gear application?
Hayward identifies PVXH007 as its large drive gear for Poolvergnuegen and AquaNaut cleaner drivetrains. Swimables does not currently publish SW-61-007 in its public cross-reference directory, so verify the existing gear before ordering.
Which cleaners use the Hayward PVXH007 large drive gear?
Current Hayward parts references document PVXH007 for Poolvergnuegen 2-wheel and 4-wheel cleaners and AquaNaut 200, 400, and 450 applications.
Can a worn large drive gear cause the cleaner to stop moving?
Yes. Worn or damaged gear teeth can cause slipping or poor engagement, but bearings, hubs, turbine parts, steering components, smaller gears, and suction problems can create similar symptoms.
What should I inspect while replacing SW-61-007?
Inspect the small drive gears, turbine assembly, shaft bearings, wheel hubs, steering components, and the surrounding gear train for additional wear or damage.
