Traction is one of the most critical—and most overlooked—factors in robotic pool cleaner performance. The Polaris Atlas Track V2 – Replacement Pool Cleaner Tread (R0916500) is a genuine Polaris replacement part designed to restore proper grip, climbing ability, and maneuverability to Polaris Atlas robotic pool cleaners.

As a robotic cleaner operates, its tracks are in constant contact with abrasive pool surfaces, steps, slopes, and walls. Over time, these tracks wear down, harden, or lose their tread pattern, causing the cleaner to slip, stall, or struggle to climb walls. When traction is compromised, even a fully functional cleaner with strong motors and clean filters cannot perform effectively.

Replacing worn tracks with the Polaris Atlas Track V2 (R0916500) restores the cleaner’s ability to grip pool surfaces, maintain consistent movement, and clean the entire pool as intended. This updated V2 track design provides improved durability and traction compared to earlier versions, helping extend service life and improve overall cleaning performance.

Why Cleaner Tracks Matter More Than You Think

Robotic pool cleaners rely on tracks or wheels to translate motor power into movement. If traction is lost, that power is wasted. The result is a cleaner that spins its tracks without moving, slides down walls, or misses large areas of the pool.

Worn tracks can lead to:

• Poor wall climbing or no wall climbing at all

• Inconsistent coverage of the pool floor

• Cleaner getting stuck on steps or drains

• Increased strain on drive motors

• Longer cleaning cycles with worse results

The Polaris Atlas Track V2 is engineered to maintain consistent grip across common pool finishes, allowing the cleaner to move efficiently and predictably.

Designed Specifically for Polaris Atlas Robotic Cleaners

The R0916500 track is manufactured to exact Polaris specifications for Atlas robotic pool cleaners. It is molded to match the drive system’s dimensions, sprocket engagement points, and flexibility requirements.

Using the correct OEM track is critical. Generic or incorrectly sized tracks can:

• Slip on the drive sprockets

• Place excess load on motors

• Wear prematurely

• Cause alignment issues

The genuine Polaris Atlas Track V2 ensures proper fit, smooth operation, and long-term reliability.

V2 Track Design for Improved Durability and Grip

The V2 designation indicates an updated track design engineered to address real-world wear patterns seen in earlier track versions. The improved tread profile and material composition help the track maintain grip longer, even under demanding conditions.

This makes the R0916500 track especially effective for:

• Pools with textured or pebble finishes

• Pools with steep slopes or deep ends

• Cleaners used frequently or year-round

• Heavy debris environments requiring longer run times

By maintaining better traction over time, the V2 track helps keep the cleaner performing at peak efficiency between service intervals.

Common Signs That Cleaner Tracks Need Replacement

Track wear happens gradually, which means performance often degrades slowly. Many pool owners mistake traction problems for motor or control issues when the real cause is worn tracks.

Signs that the Polaris Atlas track should be replaced include:

• Cleaner slipping or spinning in place

• Difficulty climbing pool walls

• Reduced ability to reach the waterline

• Cleaner getting stuck on steps or drains

• Visible smoothing or flattening of the tread

Replacing worn tracks often results in an immediate and noticeable improvement in cleaner performance.

OEM Polaris Construction for Long-Term Reliability

The Polaris R0916500 track is made from pool-grade, chemical-resistant rubberized material designed to withstand constant immersion, sanitizer exposure, and mechanical stress.

OEM Polaris tracks maintain flexibility while resisting cracking and hardening. This balance is critical—tracks that are too stiff lose grip, while tracks that are too soft wear out quickly.

For pool service professionals, using genuine Polaris tracks ensures predictable results and reduces repeat service calls.

Ideal for Homeowners and Pool Service Professionals

For homeowners, replacing worn tracks is one of the most cost-effective ways to restore cleaner performance without replacing motors or electronics. It can make an older cleaner feel new again.

For pool service professionals, the R0916500 is a high-turnover service part. Keeping tracks in stock allows quick, on-site repairs that immediately improve cleaner mobility and customer satisfaction.

Because traction issues are one of the most common causes of robotic cleaner complaints, track replacement is a key maintenance step.

Installation Overview

Installing the Polaris Atlas Track V2 is straightforward and requires no special tools.

The old track is removed from the drive assembly, and the new R0916500 track is stretched into place over the drive sprockets. Proper alignment ensures smooth rotation and correct engagement.

Once installed, the cleaner should be run through a full cleaning cycle to confirm improved movement, wall climbing, and coverage.

Replacing tracks in pairs is recommended when both show signs of wear, as uneven traction can affect cleaner balance and navigation.

Why Proper Traction Is Critical

• Enables full pool coverage

• Supports wall and waterline cleaning

• Prevents motor strain and overheating

• Improves cleaning efficiency

• Extends the life of the robotic cleaner

Tracks are a wear item, but timely replacement protects more expensive components.

Product Specifications

Buy with Confidence from Benchmark Pool Supply

When you purchase the Polaris Atlas Track V2 – Replacement Pool Cleaner Tread (R0916500) from Benchmark Pool Supply, you’re buying from a real pool supply company with hands-on service experience.

We stock genuine Polaris replacement parts trusted by pool professionals. If you need help confirming compatibility or diagnosing cleaner movement issues, our team is here to help before and after the sale.