Hayward TracVac W3HSCTRACCU Suction-Side In-Ground Pool Cleaner
Buy with Confidence from Benchmark Pool Supply
- Trusted pool professionals
- 100% Genuine Manufacturer Parts Guaranteed
- Shipping options for eligible products
Full Product Description +
Cleaner Performance Benefits
- Suction-side cleaner for in-ground pools using the pool's existing circulation system.
- Tracked drive helps maintain traction across floors, walls, drains, and common pool surfaces.
- No onboard motor, battery, or separate booster pump is required.
- Compact, lightweight cleaner is easier to handle and remove from the pool.
- Included flow-control accessories help set the cleaner within Hayward's recommended operating range.
Quick Product Summary
The Hayward TracVac W3HSCTRACCU is a suction-side automatic cleaner for in-ground pools up to 20 x 40 feet. It connects through a skimmer or dedicated suction port and uses the pool pump for operating suction. Hayward's tracked design is intended to improve mobility over drains and obstacles while cleaning floors and walls.
Best For
- Residential in-ground pools up to 20 x 40 feet.
- Pool owners who prefer a mechanical suction cleaner instead of a robotic cleaner with a power supply.
- Pools with a compatible skimmer or dedicated suction connection and adequate circulation flow.
- Common pool surfaces including concrete, gunite, vinyl, fiberglass, tile, and pebble.
Why This Matters
- Suction cleaners depend on correct water flow; too little or too much flow can reduce cleaning performance.
- Correct hose length helps the cleaner reach the farthest area of the pool without unnecessary hose.
- Tracks can improve traction where basic wheeled suction cleaners may slip or stall.
- The cleaner uses the pool's filtration system, so the pump basket and filter still need routine maintenance.
Common Signs You Need This / Use This When
- You want routine automatic floor and wall cleaning without a separate electrical power supply.
- Your pool has a usable skimmer or dedicated suction port and your circulation system can provide the required flow.
- You are replacing manual vacuuming with a simple suction-side cleaner.
- You want a cleaner that can travel over drains and common obstacles.
Product Specifications
| Specification | Details |
|---|---|
| Brand | Hayward |
| Product Line | TracVac |
| Model / SKU | W3HSCTRACCU |
| UPC / GTIN | 610377419093 |
| Cleaner Type | Suction-side automatic pool cleaner |
| Pool Type | In-ground |
| Pool Size | Up to 20 x 40 ft |
| Pool Surfaces | Concrete, gunite, vinyl, fiberglass, tile, and pebble |
| Power Source | Pool pump suction |
| Connection | Skimmer or dedicated suction port |
| Recommended Cleaner Speed | 26.5 to 32 RPM using Hayward flow setup procedure |
| Cleaner Dimensions | 8.9 in L x 11.3 in W x 7.9 in H |
| Cleaner Weight | 5.76 lb |
| Included Setup Accessories | Connector hoses, leader hose, hose float, regulator valve, regulator cap, cone adapter, flow gauge, and hose clip |
Compatibility / Fitment Notes
The TracVac is designed for in-ground pools and should be matched to the pool's suction connection and circulation performance. It can connect to a skimmer or dedicated suction port. Follow Hayward's hose-length procedure so the assembled hose reaches the farthest point in the pool, then add the leader hose as directed.
Hayward specifies a cleaner-speed range of 26.5 to 32 RPM during setup. Use the included flow gauge and regulator procedure rather than assuming more suction will improve cleaning. Incorrect flow can cause weak movement, poor coverage, or excessive wall climbing.
Compare other suction-side pool cleaners by pool size, surface compatibility, hose setup, and circulation requirements before ordering.
Installation / Use Notes
Follow the Hayward TracVac owner's manual and quick-start instructions. Balance the pool water, remove large debris, determine the correct hose length, install the hose float, and adjust flow before connecting the cleaner. Always turn the pump off before connecting, disconnecting, or servicing the cleaner.
Do not use the cleaner while swimmers are in the pool. Remove it when chemically shocking the pool and during filter backwashing. Store the hoses straight rather than coiled. Keep the pool pump basket and filter clean because the TracVac sends captured debris through the pool's filtration system. Replacement suction cleaner hoses should be selected by fit and model requirements.
Buy with Confidence
Benchmark Pool Supply helps customers match automatic cleaners to pool type, plumbing, and circulation setup. Confirm model W3HSCTRACCU and your pool's suction connection before ordering so the cleaner can be set up correctly.
Frequently Asked Questions
Is the Hayward TracVac for in-ground pools?
Yes. Hayward specifies W3HSCTRACCU for in-ground pools up to 20 x 40 feet.
Does the TracVac need a booster pump or electrical power?
No separate booster pump or electrical power supply is required. It operates from the pool pump's suction through a skimmer or dedicated suction line.
What pool surfaces can the Hayward TracVac clean?
Hayward lists concrete, gunite, vinyl, fiberglass, tile, and pebble surfaces for the TracVac.
How do I know if the TracVac has enough suction?
Hayward provides a flow gauge and regulator setup procedure and specifies a cleaner-speed range of 26.5 to 32 RPM. Follow that procedure instead of setting suction by feel.
Does the TracVac clean walls?
Yes. Hayward describes the tracked cleaner as providing floor-to-wall coverage. Actual wall climbing still depends on proper flow, pool geometry, surface condition, and setup.
