Pentair Sta-Rite 25023-0160S OEM 60 Sq Ft D.E. Element | S7MD60
Key Benefits +
How to Use +
Specifications +
Buy with Confidence from Benchmark Pool Supply +
Buy with Confidence from Benchmark Pool Supply
- Trusted pool professionals
- 100% Genuine Manufacturer Parts Guaranteed
- Fast Shipping
Full Product Description +
OEM 60 Sq. Ft. D.E. Element for Sta-Rite System 3 S7MD60
- Genuine Pentair / Sta-Rite replacement D.E. module
- Manufacturer part number 25023-0160S
- 60 sq. ft. filtration area
- Designed specifically for the System 3 S7MD60 Modular D.E. filter
- Listed as item 9A in Pentair's current SMD replacement-parts chart
- Complete modular element — not an individual conventional D.E. grid
- Original replacement for worn, damaged, or heavily fouled filter media
The Pentair Sta-Rite 25023-0160S Replacement D.E. Element is the genuine 60 sq. ft. modular filter element used in the Sta-Rite System 3 S7MD60 Modular D.E. filter. Pentair identifies 25023-0160S as the replacement module for the 60 sq. ft. SMD-series filter and lists it as item 9A in the current System 3 replacement-parts chart.
This component is different from the flat or curved individual grids used in many traditional D.E. filters. The System 3 SMD design uses a large modular D.E. element that provides the full filtration surface as one service assembly. If the original module is torn, damaged, permanently clogged, or no longer cleaning effectively after proper service, replacing the complete 25023-0160S element restores the correct factory filtration component.
Verified Fitment
- Sta-Rite System 3 S7MD60 Modular D.E. filter
- System 3 SMD Series applications calling for Pentair / Sta-Rite part 25023-0160S
Always confirm the filter model before ordering. The SMD family is available in more than one size, and the 60 sq. ft. S7MD60 uses 25023-0160S. The larger S7MD72 uses a different replacement module, part 25023-0172S. Matching the exact filter model and part number prevents ordering the wrong module.
How the System 3 Modular D.E. Element Works
The S7MD60 combines a large 60 sq. ft. filtration area with diatomaceous earth media. Pentair's current catalog lists a 9 lb. D.E. charge for the complete S7MD60 filter. During operation, D.E. coats the modular element and creates the fine filtration layer that captures suspended debris from the pool or spa water.
Pentair designed the System 3 modular element for easier service than a conventional multi-grid assembly. For routine cleaning, the filter lid can be removed and the module hosed off in place. The balanced-flow design is intended to maintain an even D.E. cake across the module and make full use of the available filtration area.
Product Specifications
| Brand | Pentair / Sta-Rite |
|---|---|
| Product Type | Modular D.E. replacement element |
| Manufacturer Part Number | 25023-0160S |
| UPC / GTIN | 022315303546 |
| Filter Series | System 3 SMD Series |
| Primary Filter Model | S7MD60 |
| Filtration Area | 60 sq. ft. |
| Parts Diagram Position | Item 9A |
| D.E. Charge for S7MD60 Filter | 9 lb. per Pentair catalog |
| Maximum Continuous Filter Pressure | 50 PSI |
| Maximum Internal Water Temperature | 104°F / 40°C |
| Product Weight | Approximately 21.76 lb. |
| Warranty | 1 year |
| OEM Status | Genuine Pentair / Sta-Rite replacement part |
Replacement & Service Notes
Shut the circulation pump off and make sure all filter pressure has been completely relieved before opening the tank. Remove the filter lid according to the System 3 owner's manual, inspect the existing module and surrounding components, and replace the element if the media is torn, structurally damaged, or cannot be restored through normal cleaning.
Before reassembly, inspect the tank O-ring, air-bleed components, internal seals, and mating surfaces. Reinstall the filter lid correctly, reopen the system valves, restore circulation, purge trapped air, and add the proper D.E. charge following Pentair's instructions for the S7MD60. Never open or service a pressurized filter.
Buy with Confidence
Benchmark Pool Supply helps customers match filter elements by exact manufacturer number, filter model, filtration area, and parts diagram. Before ordering 25023-0160S, confirm the tank is a Sta-Rite System 3 S7MD60 Modular D.E. filter and that you need the complete 60 sq. ft. replacement module rather than a smaller service component.
Frequently Asked Questions
What filter uses Pentair 25023-0160S?
25023-0160S is the genuine 60 sq. ft. replacement D.E. module for the Sta-Rite System 3 S7MD60 Modular D.E. filter.
Is 25023-0160S a complete D.E. grid set?
It is the complete modular D.E. replacement element used by the S7MD60. The System 3 SMD design does not use a conventional set of separate flat D.E. grids.
How much D.E. does the S7MD60 use?
Pentair's current catalog lists a 9 lb. D.E. charge for the complete S7MD60 filter. Follow the current owner manual when recharging the filter after service.
Does 25023-0160S fit the S7MD72?
No. The S7MD72 uses a different replacement module, part 25023-0172S. Confirm the filter model before ordering.
Is 25023-0160S a genuine Pentair / Sta-Rite part?
Yes. 25023-0160S is the genuine replacement module listed by Pentair for the Sta-Rite System 3 SMD Series S7MD60 filter.
