Restore Proper Surface Skimming and Water Circulation

A skimmer weir may seem like a small component, but it plays a critical role in keeping pool water clean and circulation balanced. The Oreq Skimmer Weir 7-1/4" (SW907) is a direct-replacement pool skimmer weir designed to restore correct surface flow, debris capture, and hydraulic efficiency in compatible pool skimmers.

When a skimmer weir becomes cracked, warped, missing, or stuck, surface debris such as leaves, insects, pollen, and oils are no longer pulled efficiently into the skimmer. Instead, debris floats past the skimmer opening and settles back into the pool. Replacing a worn or damaged weir with the SW907 immediately improves skimming action and helps protect downstream equipment.

This part is designed specifically for swimming pool skimmers and should not be confused with household or bathtub components.

What a Pool Skimmer Weir Does

The skimmer weir is the floating door located at the front of the skimmer throat. Its purpose is to regulate water flow into the skimmer while preventing debris from washing back into the pool.

A properly functioning weir:

• Creates a thin surface draw for maximum debris capture

• Prevents leaves and debris from re-entering the pool

• Maintains consistent suction to the pump

• Improves overall circulation efficiency

• Reduces strain on the pump and filter

When the weir is missing or damaged, skimming efficiency drops dramatically—often leading to cloudy water and increased manual cleaning.

For complete skimmer maintenance, this part pairs naturally with items found in our Pool Skimmer Parts Collection.

7-1/4" Size for Proper Fit and Function

The 7-1/4" width of the Oreq SW907 is critical for correct fitment. Skimmer weirs must match the skimmer throat opening precisely to float correctly and seal the opening during pump shutoff.

A correctly sized weir:

• Floats freely without binding

• Seals the skimmer opening when the pump turns off

• Opens smoothly when the pump starts

• Maintains consistent water level at the skimmer

Installing an incorrect size weir can cause sticking, poor debris capture, or water-level issues. Always verify skimmer dimensions before installation.

Common Signs a Skimmer Weir Needs Replacement

The Oreq SW907 should be replaced if you notice any of the following:

• Floating debris bypassing the skimmer

• Leaves washing back into the pool when the pump shuts off

• Broken, cracked, or missing weir door

• Weir stuck open or closed

• Reduced surface circulation

Replacing the weir is one of the fastest and least expensive ways to restore proper skimming performance.

If debris continues to bypass the skimmer after replacement, additional components such as baskets or lids may need inspection. Related items can be found in our Pool Skimmers Collection.

Designed for Pool Environments

The Oreq SW907 is manufactured for continuous exposure to pool conditions, including:

• Chlorinated water

• Saltwater systems

• UV exposure

• Temperature fluctuations

The material is designed to maintain buoyancy and flexibility over time, ensuring smooth operation without warping or sticking.

Unlike improvised or non-pool components, this weir is engineered specifically for pool hydraulics and debris control.

Improves Overall Filtration Performance

Surface debris that enters the skimmer is captured before it can sink or reach the main drain. This reduces the load on the pump and filter, helping them operate more efficiently.

Benefits of restoring proper weir function include:

• Cleaner water surface

• Less debris reaching the pump basket

• Reduced filter loading

• Improved circulation patterns

• Lower maintenance demands

For best system performance, skimmer repairs should be paired with proper filtration maintenance using products from our Pool Filters Collection.

Simple Drop-In Installation

Replacing the Oreq SW907 skimmer weir is a quick, tool-free repair.

Installation Steps:

1. Turn off the pool pump

2. Remove the skimmer lid

3. Pull out the damaged or missing weir

4. Insert the new Oreq SW907 into the skimmer throat

5. Confirm it swings freely

6. Restart the pump and observe operation

Most installations take less than five minutes and immediately restore skimming efficiency.

Compatible Pool Types

The Oreq SW907 skimmer weir is suitable for use in:

• Residential in-ground pools

• Commercial pools

• Chlorine pools

• Saltwater pools

It is compatible with skimmers designed for a 7-1/4" weir opening. Always confirm skimmer measurements for proper fit.

Why Skimmer Maintenance Matters

Skimmers are the first line of defense in a pool’s circulation system. When skimmer components are neglected, debris bypasses filtration and creates downstream issues.

Routine skimmer maintenance helps:

• Improve water clarity

• Reduce chemical demand

• Prevent pump clogging

• Extend equipment lifespan

For complete skimmer care, consider pairing this weir replacement with baskets and socks from our Pool Maintenance Tools Collection.

Buy with Confidence from Benchmark Pool Supply

At Benchmark Pool Supply, we stock professional-grade replacement parts designed specifically for swimming pool systems. The Oreq Skimmer Weir 7-1/4" (SW907) is selected for proper fit, durability, and consistent performance.

When you buy from Benchmark Pool Supply, you receive:

• Pool-specific replacement parts

• Accurate product descriptions and sizing

• Fast shipping or local pickup

• Support from knowledgeable pool professionals

We help ensure small repairs deliver big performance improvements.