Oreq Quick Pull 8" Skimmer Weir Door Replacement

Quick Pull Installation + 8-Inch Weir Selection

• OREQ SW911 is the manufacturer’s 8-inch Quick Pull skimmer weir.
• A pull cord releases the spring-loaded placement rod during installation.
• Tool-free installation simplifies replacement after the old weir is removed.
• Provides a clearly identified replacement option when the existing weir is missing or damaged.

Quick Product Summary

The OREQ Quick Pull SW911 is an 8-inch replacement skimmer weir with a spring-loaded placement rod. Its pull-cord installation design helps position a new weir in a matching skimmer opening. Select it by the manufacturer’s SW911 size reference and the actual skimmer mounting arrangement, rather than assuming any 8-inch weir will fit every skimmer.

Best For

Pool owners and service technicians replacing a missing, cracked or damaged skimmer weir where the SW911 dimensions and mounting arrangement match. It is useful for a planned service visit when the old door can be measured before ordering. Check the opening and pivot locations as well as the listed width.

Why This Matters

• A replacement weir needs enough clearance to move as intended after installation.
• OREQ offers several nearby sizes, so an 8-inch SW911 should not be confused with the separate 8-1/8-inch SW912.
• The Quick Pull feature is an installation aid; choosing the right size remains essential to a successful replacement.

Common Signs You Need This / Use This When

• The existing skimmer weir is missing or visibly damaged.
• A cracked or distorted weir no longer moves freely in its opening.
• You have measured the existing weir and confirmed that the SW911 reference matches the replacement required.

Product Specifications

Compatibility / Fitment Notes

Confirm the skimmer opening, mounting locations and clearance against the old weir and the manufacturer’s SW911 reference. OREQ lists SW911 at 8 inches and SW912 separately at 8-1/8 inches. No specific Hayward, Pentair or other skimmer-model fit is assumed here; verify the actual assembly before purchase.

Installation / Use Notes

Turn off the pool pump before working at the skimmer. Remove the old weir and align the SW911 only after confirming the size and mounting points. Follow OREQ’s Quick Pull instructions to remove the colored cord and release the spring-loaded placement rod. Check that the installed weir moves freely before restarting the circulation system.

Buy with Confidence

Benchmark Pool Supply identifies replacement weirs by their exact manufacturer references so nearby sizes are easier to compare. Confirm SW911 and your skimmer measurements before ordering, and seek help with identification when the original weir is missing.

Frequently Asked Questions

What size is the OREQ SW911 Quick Pull weir?

OREQ’s current size list identifies SW911 as 8 inches. SW912 is a separate 8-1/8-inch reference, so confirm the exact size you need.

How does the Quick Pull feature work?

After the old weir is removed and the new one is aligned, pulling and removing the colored cord releases the spring-loaded placement rod. Follow OREQ’s installation instructions.

Will SW911 fit every 8-inch skimmer opening?

Do not assume that. Check the mounting points, opening and clearance against the existing weir and the SW911 reference before purchase.

Does Quick Pull mean every future removal is tool-free?

The manufacturer describes Quick Pull as an installation feature. This listing does not promise a special tool-free removal method for later service.

What should I check after fitting the new weir?

Confirm that it is seated correctly and moves freely in the opening before restarting the pump. If it binds, stop and check the size and mounting arrangement.