Polaris 9-100-1132 OEM Drive Train Gear Kit for 360 / 380

Service the Drive Gears on a Matching Polaris 360 or 380

• OEM Polaris drive train gear kit reference 9-100-1132.
• Listed for both Polaris 360 and 380 pressure-side cleaners.
• Manufacturer diagrams identify the kit with a turbine bearing.

Quick Product Summary

The Polaris 9-100-1132 drive train gear kit is a replacement service kit for compatible Polaris 360 and 380 cleaners. The manufacturer’s parts diagrams identify this kit with a turbine bearing. It is intended for a repair in which inspection has found wear or damage in the matching gear assembly, rather than as a general cure for every cleaner that moves slowly or stops.

Best For

Owners servicing confirmed gear wear in a Polaris 360 or 380, and technicians inspecting the internal drive during a diagnosed repair. Compare the cleaner model, diagram and existing assembly before selecting the kit, especially when the cleaner has previously been rebuilt.

Why This Matters

• Both 360 and 380 coverage belongs in the part identification, so a 360-only listing can hide a supported application.
• Belts, wheels and other drive components have separate references and should be checked on their own merits.
• A gear kit is one service assembly; its name does not mean it includes every component needed for a complete cleaner rebuild.

Common Signs You Need This

• Damaged or worn gear teeth found during inspection.
• Binding or irregular drive operation traced to the matching gear assembly.
• A diagnosed turbine-bearing or gear-assembly problem for which the model diagram specifies this kit.

Product Specifications

Compatibility / Fitment Notes

Polaris 360 and 380 parts diagrams both identify 9-100-1132. Match the exact kit reference and the assembly in your cleaner before ordering. Do not assume that all Polaris pressure-side cleaners use this drive system. Internal layouts and service procedures can differ between models even when they share a kit, so use the instructions for the specific cleaner being repaired.

Installation / Use Notes

• Turn off the equipment supplying the cleaner, remove it from the pool and follow the model-specific service procedure to access the drive assembly.
• Inspect the gears and bearing along with the belts, pulleys and wheels. Establish which parts are worn before deciding what else to order.
• Keep track of the original assembly arrangement. Fit and reassemble according to the manufacturer’s instructions, then check for free movement before returning the cleaner to service and checking its operation.

Buy with Confidence

Order the exact Polaris kit reference from Benchmark Pool Supply after matching your cleaner’s diagram. For a repair involving several worn components, list the additional parts separately. This keeps the scope clear and avoids treating a single gear kit as a promise of a complete rebuild.

Frequently Asked Questions

Does 9-100-1132 fit the Polaris 380 as well as the 360?

Yes. Manufacturer parts diagrams identify this drive train gear kit for both models. Confirm the exact part reference in the diagram for your cleaner.

Is this a complete drivetrain rebuild kit?

It is identified as a drive train gear kit with a turbine bearing. Do not assume that separate belts, wheels, pulleys or every other drive component are included.

What symptoms justify inspecting the gear kit?

Damaged teeth, binding or irregular movement can justify an inspection. Slow or stopped cleaner movement alone does not prove gear failure; check the water supply and other drive components too.

Should I order a belt kit with it?

Inspect the belts first. The 9-100-1017 belt kit is a separate service item for matching 360/380 assemblies, and it is only needed when condition or the repair calls for it.

Can I use one model’s instructions for every Polaris cleaner?

No. Use the service procedure for the actual cleaner model, even when another model shares this gear-kit reference. Layout and surrounding components may differ.