Polaris 9-100-5132 Feed Pipe O-Ring for 360 / 380 Cleaners

Feed Pipe Seal Replacement Benefits + Part Identification

• Replaces the feed-pipe / in-head timer assembly O-ring identified by Polaris.
• Provides an individual seal repair for a matching cleaner assembly.
• Listed in manufacturer parts diagrams for Polaris 360 and 380.
• Helps distinguish the cleaner's feed-pipe seal from the separate wall-fitting O-ring.
• Genuine Polaris replacement identified by 9-100-5132.

Quick Product Summary

Polaris 9-100-5132 is the O-ring used at the feed-pipe / in-head timer assembly in matching Polaris 360 and 380 cleaners. It is a cleaner assembly seal, distinct from the Universal Wall Fitting quick-disconnect seal. Match the part number and the seal location in your cleaner's diagram before ordering, especially when diagnosing a water leak or servicing the feed pipe.

Best For

Pool owners and service technicians repairing the feed-pipe assembly seal in a compatible Polaris cleaner. Choose the O-ring after identifying its location and condition, rather than assuming every pressure-side cleaner leak needs the same seal.

Why This Matters

• Different O-rings can look similar while sealing different parts of the cleaner system.
• The wall fitting and the cleaner's feed-pipe assembly use separate part references.
• Inspecting the sealing surfaces helps determine whether an O-ring alone is an appropriate repair.

Common Signs You Need This / Use This When

• The matching feed-pipe assembly O-ring is visibly cut, cracked, flattened, or damaged.
• The assembly is being serviced and inspection shows that its seal needs replacement.
• A diagnosis identifies leakage at the correct feed-pipe seal location.
• Your cleaner's parts diagram calls for 9-100-5132.

Product Specifications

Compatibility / Fitment Notes

The Polaris 360 and 380 diagrams identify 9-100-5132 at the cleaner's feed-pipe assembly. The hose diagrams separately identify 6-505-00 as the UWF / quick-disconnect O-ring. For another Polaris model, confirm 9-100-5132 in that cleaner's own parts diagram. Check the exact seal location before purchase rather than choosing an O-ring by appearance or a general product name.

Installation / Use Notes

Turn off the pool and cleaner equipment before removing the cleaner for service. Follow Polaris's model-specific instructions to access the correct assembly and replace its O-ring. Inspect the groove and mating surfaces, and address any cracked or damaged assembly parts. Use only manufacturer-approved service materials where specified. Reassemble according to the manual and have the repair checked after service; use a pool professional if the seal location or procedure is unclear.

Buy with Confidence

Benchmark Pool Supply helps you identify small cleaner seals by part number and assembly location. Bring the cleaner model and a photo of the affected assembly when comparing replacement seals. Our team can help distinguish an O-ring repair from a damaged feed pipe, fitting, or other component.

Frequently Asked Questions

Where is Polaris 9-100-5132 used?

Polaris identifies it as the O-ring for the cleaner's in-head timer / feed-pipe assembly in the 360 and 380 parts diagrams.

Is this the Universal Wall Fitting O-ring?

No. The Polaris hose diagrams identify the separate UWF / quick-disconnect O-ring as 6-505-00. Match the seal location before ordering.

Does this fit every Polaris pressure cleaner?

Do not assume universal fit. The verified references here are Polaris 360 and 380; confirm the exact part in any other cleaner's diagram.

When should this O-ring be replaced?

Replace it when inspection identifies damage, wear, or a sealing problem at the matching feed-pipe assembly. Check the groove and mating components as well.

Will this fix every cleaner pressure leak?

No. Leaks can occur at other hoses, fittings, seals, or damaged assemblies. Identify the leaking location and correct part before choosing a repair.