Polaris B15 OEM Sweep Hose Clamp Replacement

Sweep Hose Attachment Clamp + Correct Cleaner Fitment

• Genuine Polaris B15 replacement clamp for the matching sweep hose attachment.
• Listed in Polaris 180, 280 and 380 diagrams; also shown in the 360 diagram.
• Retains the sweep hose at its specified attachment point when the adjoining parts are serviceable.
• Allows a damaged attachment clamp to be identified separately from hose wear rings and the sweep hose itself.

Quick Product Summary

The Polaris B15 OEM sweep hose clamp is the attachment clamp used with matching Polaris pressure-side cleaner sweep hose assemblies. Polaris diagrams list B15 at the sweep hose attachment on the 180, 280, 360 and 380. Choose it when the clamp itself is damaged or missing, and confirm both the part reference and the hose connection on your cleaner before ordering.

Best For

Pool owners and service technicians repairing an identified sweep hose attachment problem on a matching cleaner. Inspect the hose end and attachment fitting as well as the clamp, particularly if the hose has repeatedly loosened or disconnected.

Why This Matters

• The sweep hose clamp, wear rings and hose are different service parts. Choosing the attachment clamp by its reference avoids confusing it with a ring fitted farther along the hose.
• A serviceable clamp depends on a serviceable hose end and attachment point. Damage elsewhere in the connection may require additional attention.
• Correct part identification keeps a small attachment repair focused without promising that a clamp alone will correct weak sweep motion.

Common Signs You Need This / Use This When

• Cracking, deformation or other damage to the identified B15 clamp.
• A missing clamp where the matching diagram specifies B15.
• An attachment problem traced to the clamp after inspecting the hose end and fitting.

Product Specifications

Compatibility / Fitment Notes

Confirm B15 in the parts diagram for the exact cleaner and sweep hose arrangement. A similar-looking clamp on another hose or fitting does not establish compatibility. Inspect the hose end and attachment fitting before ordering; a clamp is a separate component from the complete hose. The cleaner diagram’s assembly count does not state the retail package quantity.

Installation / Use Notes

Turn off the equipment operating the cleaner and remove the cleaner from the pool before sweep hose service. Inspect the attachment, hose end and clamp, and follow the model-specific instructions for fitting the matching replacement. Confirm correct reassembly and check the connection during normal operation.

Buy with Confidence

Benchmark Pool Supply helps pool owners identify the correct sweep hose service part. Match B15 to the attachment clamp in your cleaner diagram and check the adjoining hose before selecting the repair.

Frequently Asked Questions

Which cleaner diagrams list the Polaris B15 clamp?

Polaris 180, 280, 360 and 380 diagrams list B15 at the sweep hose attachment. Confirm the exact cleaner and hose configuration before ordering.

Is B15 the wear ring fitted along the sweep hose?

No. B15 is the sweep hose attachment clamp. The hose wear rings are different service components with their own part reference.

Will a new clamp fix every sweep hose problem?

No. Inspect the hose end, attachment fitting and the rest of the sweep hose. A replacement clamp addresses an identified clamp problem rather than every cause of weak sweep motion.

Can I reuse a damaged hose with a new clamp?

Inspect the hose and follow the manufacturer’s service guidance. A new clamp should not be used to compensate for a damaged hose end or attachment fitting.

Is B15 the complete sweep hose?

No. The attachment clamp and complete sweep hose are separate references in the parts diagram. Match the individual component needed for your repair.